If you're trying to figure out how to connect HP ENVY 6055e to WiFi, the process is usually easier than it first looks. The printer doesn't have a large touch screen where you can simply pick your Wi-Fi network and type the password, so most of the setup is done through the HP app or HP Smart.
This can get confusing when the printer was connected to an old router, the Wi-Fi password has changed, or the app can't find the printer at all.
The good news is that you don't need to start changing random router settings. Start with the basic connection, then work through the small checks below if the printer isn't found. HP's current setup material for the ENVY 6055e points users toward its printer app for wireless setup, while HP's older material may still show HP Smart.
How to Connect HP ENVY 6055e to WiFi: Quick Steps
For most new setups, the basic process looks like this:
- Turn on the HP ENVY 6055e.
- Put the printer near your Wi-Fi router during setup.
- Connect your phone, Windows PC, or Mac to the Wi-Fi network you want the printer to use.
- Install or open the HP app. Older installations may show HP Smart.
- Select the option to add or set up a printer.
- Put the printer into Wi-Fi setup mode if the app doesn't find it.
- Select your Wi-Fi network.
- Enter the Wi-Fi password carefully.
- Wait for the printer to join the network.
- Add the printer to your computer or phone and print a test page.
HP says the printer and the setup device should be near the router during wireless setup, and the device should already be connected to the desired Wi-Fi network.
If you've already tried this and the printer isn't showing up, don't keep installing the app again. The troubleshooting sections later in this guide deal with the most common reasons the ENVY 6055e can't be found.
What You Need Before Connecting the HP ENVY 6055e to WiFi
A little preparation makes this much easier. You don't need special equipment, but you do need a few basic things ready.
- HP ENVY 6055e printer: Keep it powered on and ready.
- Power connection: Make sure the printer is plugged into a working outlet.
- Wi-Fi router: The printer needs access to the wireless network you want to use.
- Wi-Fi network name: This is the name you see when you look at available wireless networks.
- Wi-Fi password: You'll enter this during setup.
- Phone or computer: You can use an Android phone, iPhone, Windows PC, or Mac.
- HP app: Current HP setup uses the HP app. Some older material still refers to HP Smart.
- Internet connection: An internet connection is useful for getting the app and completing some setup tasks.
- A short distance from the router: Keep the printer and setup device close to the router while getting the printer connected.
There's an easy mistake here: your Wi-Fi password is not the same thing as your router administrator password.
The Wi-Fi password is what you enter when joining the wireless network from a phone or laptop. The router administrator password is used to change router settings. For normal printer setup, you usually need the Wi-Fi password, not the router's admin login.
Before starting, take a look at your phone. Open its Wi-Fi settings and make sure it is connected to the network you want the printer to use.
If your phone is connected to SmithFamily-Guest while your printer is being set up for SmithFamily, the app may not be able to complete the setup properly.
HP also advises placing the printer and setup device near the router during setup.
Can the HP ENVY 6055e Connect to WiFi?
Yes. The HP ENVY 6055e has built-in wireless networking, so you can connect it to your home or office Wi-Fi and print without keeping a USB cable connected to the computer.
HP lists wireless operation on both 2.4 GHz and 5 GHz networks for this printer family.
Once the printer joins your local Wi-Fi network, other devices on that same network can communicate with it. That means you can print from a Windows PC in one room, a Mac in another room, or a phone without physically connecting each device to the printer.
There is one important distinction here.
Being connected to Wi-Fi and being connected to the internet are not exactly the same thing.
Your printer mainly needs to communicate with the devices on your local network for normal wireless printing. Some HP features and app functions may use internet access, but a basic local print job is about communication between your device, router, and printer.
This distinction becomes useful when troubleshooting. A phone may show that the internet works perfectly while the printer still can't be found. In that case, the issue may be local network communication rather than your internet service.
HP also lists Wi-Fi Direct as another wireless option. Wi-Fi Direct creates a direct wireless connection between a device and the printer instead of putting the printer on your normal home network.
How to Connect HP ENVY 6055e to WiFi Using HP Smart
For readers searching for the HP ENVY 6055e WiFi setup, this is the main method to try.
There is one naming change to understand before you begin. HP currently uses the HP app for printer setup on current versions of Windows, Mac, iPhone, and Android. HP says the HP app has replaced HP Smart on many systems, although HP Smart remains available on some systems and older setup material still uses that name.
So if this guide says HP app and your computer says HP Smart, don't assume you've downloaded the wrong thing. The exact screen can also change with app updates.
1. Turn on the printer
Plug in the HP ENVY 6055e and turn it on.
Give it a little time to finish starting up. Make sure there isn't a paper problem, cartridge warning, or another visible error stopping the printer from becoming ready.
For a first setup, place the printer fairly close to your router. You can move it to its normal location later.
2. Prepare your phone or computer
Connect the phone, Windows PC, or Mac to the Wi-Fi network you want the printer to join.
For example, suppose your home has two networks:
SmithHome
and
SmithHome-Guest
Connect your setup device to SmithHome if that is the network you want the printer to use.
Don't connect your phone to the guest network simply because it has a stronger signal. Guest networks can prevent devices from communicating with one another. HP specifically warns that guest networks can prevent normal printer discovery and printing.
3. Install or open the HP app
Open the HP app on your phone or computer.
If your existing installation says HP Smart, you can use that where it remains available. HP's current setup page says the HP app is now the main printer app, while HP Smart is still available on some operating systems.
The app is useful because it handles printer discovery and guides you through the wireless setup rather than making you manually enter network details into several places.
On a phone, HP may ask for permissions that help it find nearby printers. Depending on your phone and app version, Bluetooth or location access may be requested during setup. HP specifically says Bluetooth should be turned on for printer detection and that mobile location access may be requested during setup.
4. Add the printer
Open the option to add a printer.
The wording can vary. You might see something like Add Printer, Add Device, or Set Up a New Printer.
Choose the option for a new printer if you are setting up the ENVY 6055e for the first time.
If the printer was already used with this phone or computer, the app may show it as an available printer instead.
Don't worry if the printer takes a short while to appear. HP says it can take a few minutes for a printer to display during setup.
5. Put the printer into Wi-Fi setup mode if required
This is the part that often causes confusion.
If the HP app can't find the printer, the printer may not be in Wi-Fi setup mode. This can happen when the printer was previously connected to another Wi-Fi network or when an earlier setup attempt was interrupted.
For the ENVY 6000 and 6000e family, HP gives a specific procedure for restoring Wi-Fi setup mode: press and hold the Wireless button on the back of the printer for five seconds. HP says the printer then enters setup mode, and the wireless connection should be completed through the HP app within two hours.
This is different from a full factory reset.
You're not wiping everything from the printer. You're putting its wireless setup back into a state where the HP app can configure the network again.
6. Select the correct Wi-Fi network
Once the printer appears in the setup process, select your home or office Wi-Fi network.
Take a second to read the network name before choosing it.
If your router has several networks, make sure you're choosing the one you actually use for your phones and computers.
This matters even more in homes with mesh Wi-Fi systems, guest networks, or separate networks for work and personal devices.
7. Enter the Wi-Fi password
Type your Wi-Fi password carefully.
A password such as:
HomePrinter2026!
is different from:
homeprinter2026!
Capital letters matter.
Watch for:
- Capital letters
- Numbers
- Spaces
- Exclamation marks
- Similar-looking characters
- Old passwords saved on the phone
- The wrong network name
If the app rejects the password, don't assume the printer has a hardware problem.
The first thing to check is whether the phone or computer can join that same Wi-Fi network using the password you entered.
If your phone itself can't connect, the printer won't connect either.
8. Wait for the connection
After you enter the password, give the printer a little time.
Don't switch apps repeatedly or turn the printer off while it is trying to join the network.
HP says that when Wi-Fi setup mode is active, the wireless indicator can blink until the connection is made or the setup window expires.
A printer can take a little longer than a phone to finish joining the network. That's normal.
9. Confirm that the printer is connected
Once the app says the printer has been added, check the printer inside the app.
You should see the ENVY 6055e as an available printer.
You can also check whether the printer is showing a normal ready state rather than an error.
On the ENVY 6000 family, HP says a purple-pulsing edge light indicates that the printer is connecting to a Wi-Fi network. Other light patterns indicate different printer states.
10. Print a test page
Don't stop immediately after the app says setup is complete.
Print a short document.
A test print confirms more than the Wi-Fi connection. It also checks whether the printer has been added correctly to your phone or computer.
This is useful because a printer can join the Wi-Fi network successfully while the computer still has an old printer entry saved.
If the test page prints, your basic wireless setup is working.
How to Connect My HP ENVY 6055e to WiFi From a Phone
A phone is often the easiest device for the first setup because you can stand beside the printer while working through the process.
The general process is similar on Android and iPhone, but the permissions and screens can differ.
Android
- Connect the Android phone to your home Wi-Fi: Open Wi-Fi settings and confirm you're using the network you want the printer to join.
- Turn on Bluetooth: HP says Bluetooth helps the HP app detect the printer during setup.
- Allow requested permissions: Depending on your Android version and the app version, HP may ask for location access while it searches for the printer.
- Open the HP app: Choose the option to add or set up a printer.
- Select the ENVY 6055e: If it appears, choose it and follow the setup prompts.
- Restore Wi-Fi setup mode if the printer isn't found: For the ENVY 6000e family, HP says to hold the Wireless button on the back for five seconds, then return to the app within two hours.
- Choose your Wi-Fi network: Pick your normal home or office network rather than a guest network.
- Enter the password: Type it carefully.
- Wait for setup to finish: Leave the printer powered on.
- Print a test document: This confirms that the wireless connection and printer setup are both working.
If Android finds other nearby printers, make sure you're choosing the ENVY 6055e and not another HP printer in the area.
iPhone
- Connect the iPhone to Wi-Fi: Use the same Wi-Fi network you want the printer to join.
- Turn on Bluetooth if requested by the HP app: HP uses Bluetooth during printer detection in its setup process.
- Open the HP app: Start the printer setup.
- Add the ENVY 6055e: Select the printer when it appears.
- Put the printer into setup mode if needed: For this printer family, hold the Wireless button on the back for five seconds if the printer needs Wi-Fi setup mode restored.
- Choose your network: Select the Wi-Fi network used by the iPhone.
- Enter the Wi-Fi password: Check every character before continuing.
- Wait for the connection: Give the printer time to join the network.
- Finish adding the printer: Follow the remaining app instructions.
- Print a test document: You can also use Apple's AirPrint feature once the printer and iPhone are on the same Wi-Fi network. Apple says AirPrint requires the iPhone and printer to use the same Wi-Fi network.
How to Connect HP ENVY 6055e to WiFi From a Windows Computer
Windows users have two parts to this job.
First, the printer needs to join Wi-Fi.
Second, Windows needs to add that printer.
Those two steps are connected, but they aren't the same thing.
1. Connect Windows to Wi-Fi
Open the Windows Wi-Fi settings and make sure the computer is connected to the same network you want the printer to use.
If your PC is connected by Ethernet during setup, HP's setup guidance says to temporarily use Wi-Fi on the computer for the wireless setup process.
2. Open the HP app
Use the current HP app if your Windows version provides it.
If you already have HP Smart installed and it remains available on your system, its setup process can still be used where applicable. HP's current documentation says the HP app has replaced HP Smart on many systems.
3. Add the printer
Choose the option to add or set up a printer.
The app should search for nearby printers.
If the ENVY 6055e is already on your network, it may appear as an available printer.
If it's a new setup, the app may guide you through putting the printer into Wi-Fi setup mode.
4. Finish wireless setup
Choose the Wi-Fi network, enter the password, and wait for the printer to join.
Don't close the app while the connection is being created.
5. Check Windows printer settings
After setup, open:
Start → Settings → Bluetooth & devices → Printers & scanners
Look for the HP ENVY 6055e.
Microsoft's current Windows instructions say a wireless printer should be on the same network as the Windows computer before Windows tries to add it. If it doesn't appear automatically, Windows provides an option to add a printer manually.
6. Select the correct printer
If you see more than one ENVY 6055e entry, check which one is active.
For example, you might see:
- HP ENVY 6055e
- HP ENVY 6055e Copy 1
- HP ENVY 6055e Offline
Several old entries can make printing confusing.
Remove the entries you no longer use and keep the current one.
7. Print a test page
Send a simple document to the printer.
If it prints, the setup is complete.
If the printer appears in Windows but doesn't print, move to the troubleshooting section rather than reinstalling the app immediately.
How to Connect HP ENVY 6055e to WiFi on a Mac
Mac setup works a little differently from Windows.
The Mac has its own Printers & Scanners area, and macOS can often use AirPrint for supported printers. Apple says a network printer can be added through System Settings → Printers & Scanners.
1. Connect the Mac to Wi-Fi
Make sure the Mac is connected to the same Wi-Fi network you want the printer to use.
2. Open the HP app
Use the current HP app where available.
HP's ENVY 6000e setup material also includes Mac setup guidance using HP Smart, so you may see either name depending on the software already installed on the Mac.
3. Add the printer
Open the printer setup area in the HP app and add the ENVY 6055e.
If the printer has never been set up, follow the new-printer process.
If it was used before, the app may detect an existing printer entry.
4. Complete Wi-Fi setup
Choose your network, enter the password, and allow the printer to finish connecting.
If the printer was connected to another network in the past, restore Wi-Fi setup mode first.
5. Check macOS printer settings
Open:
Apple menu → System Settings → Printers & Scanners
If the printer is already listed, select it.
If it isn't there, choose Add Printer, Scanner or Fax and look for the ENVY 6055e.
Apple says that when a Mac and printer are already on the same Wi-Fi network, a network printer may appear automatically.
6. Add the printer
Select the ENVY 6055e and add it.
macOS may use AirPrint rather than requiring a separate driver. Apple says AirPrint can print without extra printer drivers when the printer supports it.
7. Print a test page
Open a small document and send it to the ENVY 6055e.
If the print works, you're done.
If the printer appears in macOS but refuses to print, remove the old entry and add it again before doing anything more drastic.
HP ENVY 6055e WiFi Setup Without a Computer
You don't need a Windows PC or Mac just to set up wireless printing.
A smartphone can handle the setup through the HP app.
This is useful for someone who has just bought the printer and doesn't want to wait until they have access to a computer.
The basic process is:
- Turn on the printer.
- Connect the phone to the desired Wi-Fi network.
- Install the HP app.
- Turn on Bluetooth.
- Open the app.
- Add the printer.
- Restore Wi-Fi setup mode if the printer isn't found.
- Select the home Wi-Fi network.
- Enter the password.
- Finish setup.
- Print a test page.
HP's current app instructions specifically mention Bluetooth for printer detection and mobile location access when requested during setup.
After the printer is connected, iPhone users can also use AirPrint when the phone and printer are on the same Wi-Fi network.
Android users can use the available HP printing options or the Android print system, depending on the phone and app setup.
What If the HP ENVY 6055e Is Not Showing Up in HP Smart?
This is one of the most common problems.
The first thing to understand is that not seeing the printer in the app doesn't automatically mean the printer is broken.
The app has to discover the printer over the local connection. Several things can prevent that discovery.
1. The printer isn't in setup mode
If the printer was previously connected to another network, it may still be holding its old network information.
Restore Wi-Fi setup mode and try again.
For the ENVY 6000e family, HP says to press and hold the Wireless button on the back of the printer for five seconds. After that, return to the app within two hours to finish setup.
2. The printer is too far from the router
During setup, don't place the printer at the far end of the house.
Put it close to the router.
Once the setup works, move it to its normal location and test the connection again.
A weak wireless signal can make setup appear unreliable.
3. Your phone or computer is on another Wi-Fi network
This is surprisingly common.
Check the Wi-Fi name on the phone or computer.
If the printer is being configured for HomeWiFi but the phone is on HomeWiFi-Guest, discovery may fail.
4. You're using a guest network
Guest networks are often configured to keep connected devices from communicating with each other.
That can stop your phone or computer from seeing the printer even though both devices show a strong Wi-Fi connection.
HP specifically identifies guest networks as a possible reason wireless printing doesn't work normally.
5. A VPN is interfering
A VPN changes how the device sends network traffic.
HP advises disconnecting a VPN during printer setup when it is interfering with the connection.
If you use a VPN on your phone or computer, temporarily disconnect it and try the printer setup again.
6. The router has device isolation enabled
Some routers have a feature called AP isolation, client isolation, or a similar setting.
It prevents wireless devices from talking directly to one another.
That can be useful for certain public or guest networks, but it can cause problems for printers.
HP says router isolation can stop printer setup and printing because the printer and computer can't communicate across the local network.
If your home router has this setting enabled, check the router's wireless settings.
7. The app needs another try
Close the HP app completely.
Restart it.
If the printer still doesn't appear, restart the printer as well.
Then try again.
This is a better first step than deleting everything from your computer.
8. The printer was previously connected to another network
This is very common after changing internet providers.
For example, you might replace an old router called:
SmithHome
with a new router called:
SmithHome2
The printer doesn't automatically know that the new network is the one you want.
Restore Wi-Fi setup mode and run the setup again.
HP ENVY 6055e Won't Connect to WiFi
The right fix depends on what happens during setup.
The Wi-Fi password is rejected
Check the password from another device.
Take your phone and disconnect it from the Wi-Fi network.
Then connect again using the same password.
If the phone also rejects the password, the printer isn't the problem.
If the phone connects but the printer doesn't, carefully re-enter the password in the HP app.
Pay attention to:
- Uppercase letters
- Lowercase letters
- Numbers
- Symbols
- Spaces
- Similar characters
- The selected network
A password with one wrong character will fail.
The printer connects but goes offline
This means the printer may have joined the wireless network, but the computer or phone can't reach it reliably.
There is a difference between:
Printer connected to Wi-Fi
and
Computer able to communicate with printer
The first can work while the second fails.
Start by checking whether your computer is on the same Wi-Fi network.
Then check whether a guest network or router isolation setting is blocking communication.
HP says AP isolation can prevent devices on the same router from communicating with the printer.
The printer keeps trying to connect
If the printer never finishes connecting, move it closer to the router.
Then check the network name and password.
If you recently changed routers, restore Wi-Fi setup mode before trying again.
If the router has separate wireless networks, make sure you're selecting the correct one.
The printer worked before but stopped
Think about what changed.
Did you:
- Replace the router?
- Change the Wi-Fi password?
- Change the Wi-Fi network name?
- Change internet providers?
- Move the printer?
- Install a new mesh system?
- Change router security settings?
If the answer is yes, the old printer configuration may no longer match your current network.
This is where many people assume the printer has failed, when the network has simply changed.
The printer connects but the computer can't print
This is a separate issue.
The printer may already be connected to Wi-Fi correctly.
The computer may still have:
- An old printer entry
- A duplicate printer
- An old network address
- A stuck print queue
- The wrong printer selected
Windows, for example, requires the printer and PC to be on the same network for normal wireless printer installation.
So don't automatically reset the printer if the printer itself is already connected.
How to Reconnect HP ENVY 6055e to a New WiFi Network
This situation comes up often after a router replacement.
Suppose your old network was:
Home123
and your new network is:
Home456
The printer doesn't simply switch because your internet service changed.
The printer needs to be connected to the new wireless network.
1. Put the printer near the new router
This gives you a stronger connection while setting things up.
2. Connect your phone or computer to the new Wi-Fi
Use the same network that the printer should join.
3. Open the HP app
Start the printer setup process.
4. Restore Wi-Fi setup mode
For the ENVY 6000e family, press and hold the Wireless button on the back for five seconds. HP says the printer then enters Wi-Fi setup mode.
5. Add the printer again
Return to the HP app within two hours and choose the printer.
6. Select the new network
Pick the new Wi-Fi name.
7. Enter the new password
Use the current Wi-Fi password, not the password from the old router.
8. Wait for the connection
Allow the printer to finish joining the network.
9. Test from the computer
Open Windows or Mac printer settings and check whether the printer appears.
10. Remove the old printer entry if necessary
If the computer still shows the old printer, remove that entry and add the newly connected printer.
This approach is much better than repeatedly reinstalling the HP app.
How to Reset the WiFi Settings on HP ENVY 6055e
A wireless reset is useful when the printer is stuck with old network information or won't appear during a new setup.
It is different from a full factory reset.
A Wi-Fi setup reset is focused on getting the wireless connection ready for a new setup.
A factory reset is much more disruptive and should not be your first choice for a normal Wi-Fi problem.
For the ENVY 6000e family, HP's current instructions say to restore Wi-Fi setup mode by pressing and holding the Wireless button on the back of the printer for five seconds.
After doing this, return to the HP app and add the printer within two hours.
What a Wi-Fi reset does
It prepares the printer for a new wireless setup.
This is useful after:
- A router change
- A Wi-Fi password change
- A network name change
- Moving the printer to another location
- A failed wireless setup
- A printer that no longer appears in the app
What it does not mean
It does not mean you should erase every printer setting.
Don't use a full factory reset simply because the printer isn't showing in the app.
Start with the wireless setup process.
HP ENVY 6055e WiFi Light or Wireless Indicator Explained
The ENVY 6055e belongs to the ENVY 6000 family, which uses an edge light and wireless indicators to show different printer states.
HP's current information for the ENVY 6000 family says a light-blue edge bar means the printer is idle and ready, while a purple-pulsing edge bar indicates that the printer is connecting to Wi-Fi.
The lights can also indicate other printer states, such as processing a print job or an issue with ink or paper.
For a Wi-Fi problem, the useful thing is to watch what happens during setup.
If the printer enters wireless setup and the light changes while the app is trying to connect, allow the process to finish before restarting anything.
If the printer remains stuck, return to the wireless setup procedure and check the network and password.
Why Your HP ENVY 6055e Can't Find Your WiFi Network
There are several reasons a wireless network may not appear during setup.
The router is too far away
For setup, move the printer closer to the router.
Once the printer connects, you can move it to its normal spot and test the signal.
You're selecting the wrong network
Homes often have several network names.
You might see:
- HomeWiFi
- HomeWiFi-5G
- HomeWiFi-Guest
- HomeWiFi-Ext
Read the names carefully.
HP lists 2.4 GHz and 5 GHz wireless operation for the ENVY 6055e family, so both bands are relevant for this model.
The network is hidden
A hidden Wi-Fi network doesn't broadcast its name in the normal list.
If your home network is hidden, the usual setup process may not show it in the same way as a visible network.
Check your router settings or use the network information supplied by your internet provider.
You're using a guest network
Guest networks can prevent local device communication.
For a normal printer setup, use your main home or office network instead.
Router settings are blocking local devices
AP isolation or client isolation can prevent the printer from communicating with your phone or computer.
HP specifically identifies router isolation as a cause of printer setup and printing problems.
The router was recently replaced
A new router may use a new network name, new password, or different wireless settings.
Restore Wi-Fi setup mode on the printer and run the setup again.
You're using a mesh Wi-Fi system
Mesh systems can work well with printers, but setup can be confusing when the system uses several access points or different network names.
During setup, keep the printer close to the main router or nearest mesh unit.
Make sure your phone is using the same normal home network.
If the printer connects but later disappears, check whether the mesh system has a setting that prevents devices from communicating locally.
HP ENVY 6055e Connected to WiFi but Not Printing
This is a different problem from failing to connect.
A printer can successfully join Wi-Fi and still refuse to print from your computer.
Start with the simple checks.
1. Check which printer is selected
When you click Print, make sure the selected printer is the HP ENVY 6055e.
Don't assume the computer picked the right printer.
If you previously owned another printer, its name may still be selected.
2. Check for duplicate entries
Windows or macOS may show several copies.
For example:
- HP ENVY 6055e
- HP ENVY 6055e Series
- HP ENVY 6055e Offline
Remove old entries that you no longer use.
3. Check the print queue
A stuck document can block everything behind it.
Open the printer's queue and remove old jobs.
Restarting the printer alone may not clear the computer's queue.
4. Check the computer's Wi-Fi
The printer may be on your home network while the computer is connected to a guest network.
Make sure both devices are using the same local network.
5. Check router isolation
If both devices appear to be on the same network but still can't communicate, AP isolation may be involved. HP says this router feature can interfere with printer setup and printing.
6. Restart the printer and computer
Turn the printer off.
Restart the computer.
Turn the printer back on and wait until it is ready.
Then try a new test print.
7. Remove and re-add the printer
If the printer is still installed with an old network entry, remove it from Windows or Mac and add it again.
On Windows, Microsoft provides the printer list under Settings → Bluetooth & devices → Printers & scanners.
On Mac, use System Settings → Printers & Scanners.
HP ENVY 6055e Says Offline After WiFi Setup
An offline message can make the situation look worse than it is.
Use this order instead of immediately reinstalling the printer software.
1. Check printer power
Make sure the printer is actually on and ready.
2. Check the Wi-Fi connection
Confirm the printer is still connected to your wireless network.
3. Check the phone or computer network
Make sure the device is on the same Wi-Fi network.
4. Restart the printer
Turn it off, wait briefly, then turn it back on.
5. Restart the router if needed
If other devices are also having network problems, the router may be the source.
6. Check the printer in the HP app
See whether the app can find the printer.
7. Remove duplicate printer entries
Keep the current printer and remove old copies.
8. Clear stuck print jobs
A blocked queue can make a working printer appear unusable.
9. Add the printer again
Remove the old computer entry and add the printer again.
10. Reinstall software only when needed
Don't reinstall the HP app five times just because the printer says offline.
First check the network.
This order matters because software can't fix a printer that has lost its Wi-Fi connection.
HP ENVY 6055e WiFi Troubleshooting Checklist
When you don't know where to begin, use this short checklist.
Printer
- Printer is powered on.
- Printer has no obvious paper or ink error.
- Printer is close to the router during setup.
- Wi-Fi setup mode is active when required.
- Printer was not recently moved to another network without being reconfigured.
Router
- Wi-Fi is working on your phone.
- You know the correct network name.
- You know the current Wi-Fi password.
- You're not using a guest network.
- The router isn't blocking local device communication.
- The printer is close enough to get a reliable signal.
Phone or Computer
- Device is on the same Wi-Fi network.
- Bluetooth is on during HP app setup where requested.
- Required mobile permissions are allowed when requested.
- VPN is temporarily disconnected if setup fails.
- The computer isn't connected to a different network.
Software
- HP app or HP Smart is installed as appropriate.
- Printer has been added.
- No duplicate printer entries are causing confusion.
- Print queue is clear.
- The correct printer is selected.
Working through these checks in order is often faster than trying random fixes.
Common Mistakes When Setting Up HP ENVY 6055e Over WiFi
A few mistakes show up again and again.
Entering the wrong Wi-Fi password
The password may be printed on your router, shown in the router app, or stored on another device.
Don't guess.
If you're unsure, verify it by connecting your phone to the network again.
Connecting the phone to the wrong network
Your phone needs to be on the network you want the printer to use.
A guest network is a common source of trouble.
Assuming the printer changes networks automatically
If you replace your router, the printer doesn't automatically know the new network details.
You need to run the wireless setup again.
Reinstalling software for a network problem
This is one of the biggest time-wasters.
If the printer can't connect to Wi-Fi, installing the same app again won't fix the wireless connection.
Check the network first.
Leaving the printer too far from the router
Setup is easier when the printer is close to the router.
After it works, move the printer back to its normal location.
Keeping old printer entries
If Windows or Mac has three versions of the same printer, it becomes hard to tell which one is current.
Remove the old entries.
Forgetting about a Wi-Fi password change
If you changed your Wi-Fi password last week, the printer may still have the old password.
This is a strong reason to restore Wi-Fi setup mode and connect the printer again.
Does HP ENVY 6055e Need the Internet to Print Over WiFi?
Not for every local print job.
There are three separate pieces to understand:
Internet connection: Your router's connection to the outside internet.
Local Wi-Fi network: The wireless network inside your home or office.
Printer-to-device communication: The connection that lets your phone or computer send a print job to the printer.
A printer can be connected to your local Wi-Fi even when the internet connection is temporarily down.
For normal network printing, the phone or computer and printer need to be able to communicate across the local network.
HP also offers Wi-Fi Direct, which creates a direct wireless link between a device and the printer and does not require an internet connection for sending print jobs.
That can be useful when you don't have normal network access or when you need a temporary direct connection.
For everyday home printing, though, connecting the ENVY 6055e to your regular Wi-Fi network is usually the simpler setup.
Can You Connect HP ENVY 6055e With USB Instead?
Yes.
USB is a useful alternative when wireless setup is giving you trouble.
A USB connection has one big advantage: it removes the Wi-Fi network from the problem.
If the printer prints correctly over USB, you have learned something useful. The printer itself may be working fine, while the wireless setup needs attention.
USB makes sense when:
- You only print from one computer.
- The router is unreliable.
- Wi-Fi setup is failing.
- The printer sits beside your computer.
- You need to print something urgently.
Wi-Fi makes more sense when:
- Several computers use the printer.
- People print from phones.
- The printer is in another room.
- You want to avoid a cable running across the desk.
Apple also lists USB as one possible way to help configure Wi-Fi printing from a Mac when the printer and setup software allow it.
How to Check Whether the HP ENVY 6055e Is Really Connected
There are several ways to check.
Check the HP app
Open the HP app and look for the ENVY 6055e.
If the app sees the printer and shows it as ready, that's a good sign.
Check Windows
Open:
Start → Settings → Bluetooth & devices → Printers & scanners
Look for the ENVY 6055e.
Microsoft says Windows can find network printers when the printer and computer are on the same network.
Check Mac
Open:
Apple menu → System Settings → Printers & Scanners
Look for the printer.
Apple says network printers can appear when the Mac and printer are already connected to the same Wi-Fi network.
Check the printer status
Look for a normal ready state rather than an error.
The ENVY 6000 family uses its edge light and other indicators to show printer status, including wireless activity.
Print a test page
This is the best real-world check.
A printer can look connected in an app but still have a problem with the computer's printer entry.
A successful test page tells you that the whole path is working.
When You Should Reset the Printer vs When You Shouldn't
Resetting can solve some problems, but it shouldn't be the first answer to every Wi-Fi issue.
Use the least disruptive option first.
Restart the printer
Use this when:
- The printer seems frozen.
- The app can't communicate with it.
- A print job is stuck.
- The printer recently lost connection.
A restart does not change your Wi-Fi setup.
Reconnect Wi-Fi
Use this when:
- You changed the router.
- You changed the Wi-Fi password.
- You changed the network name.
- The printer was moved to another home or office.
Reset Wi-Fi setup mode
Use this when:
- The app can't find the printer.
- The printer still has old network details.
- A wireless setup attempt failed.
- You're moving the printer to another network.
For the ENVY 6000e family, HP provides the five-second Wireless-button procedure for restoring Wi-Fi setup mode.
Remove the printer from the computer
Use this when:
- Several copies appear.
- Windows or Mac shows an old printer entry.
- The printer was moved to a new network.
- The computer keeps sending jobs to the wrong entry.
Reinstall the HP software
Use this later, not first.
It makes more sense when the app itself is failing, the printer installation is damaged, or the computer has a software problem.
Full printer reset
Save this for cases where HP's instructions specifically call for it.
A full reset can remove settings you didn't intend to change.
HP ENVY 6055e WiFi Setup for Different Situations
New printer, new setup
Start with the printer near the router.
Connect your phone or computer to your normal Wi-Fi.
Open the HP app, add the printer, restore Wi-Fi setup mode if needed, and enter your network password.
Once the printer joins Wi-Fi, add it to Windows or Mac and print a test page.
New router
This is one of the most common reasons a previously working printer suddenly stops printing.
The new router may have a different network name or password.
Restore Wi-Fi setup mode on the printer and run the HP app setup again.
Changed Wi-Fi password
The printer may still have the old password.
Reconnect it to the network using the new password.
If the app can't find the printer, restore Wi-Fi setup mode first.
New computer
The printer may already be connected to Wi-Fi.
In that case, don't reset the printer.
Instead, install the HP app on the new computer and add the existing network printer.
Windows can also add a wireless printer through Settings → Bluetooth & devices → Printers & scanners.
New phone
The printer doesn't necessarily need to be reconfigured just because you bought a new phone.
Connect the new phone to the same Wi-Fi network as the printer.
Then install the HP app and add the existing printer.
For an iPhone, AirPrint can also find a compatible printer when both devices use the same Wi-Fi network.
Printer moved to another house or office
The old Wi-Fi details will probably no longer apply.
Restore Wi-Fi setup mode and configure the printer with the new network.
Keep the printer close to the new router while doing this.
Printer was previously owned by someone else
A used printer may still contain the previous owner's wireless setup.
Don't spend time trying to make your phone connect to an unknown old network.
Restore Wi-Fi setup mode and start a fresh wireless setup using your own network.
Printer suddenly stopped connecting
Think about what changed before touching the printer.
Did the router restart?
Did the internet provider replace equipment?
Did someone change the Wi-Fi password?
Did the printer move?
Did the computer switch to another network?
The answer often points to the cause.
Final Thoughts
The normal answer to how to connect HP ENVY 6055e to WiFi is fairly simple: connect your phone or computer to the right Wi-Fi network, open the HP app, add the printer, and follow the wireless setup prompts.
The trouble usually starts when the printer has old network details, the wrong Wi-Fi password is entered, the phone is on a guest network, or the computer has an old printer entry.
If the printer was previously working and then stopped after a router or password change, don't start by reinstalling everything. Restore Wi-Fi setup mode, connect the printer to the current network, and then check the printer entry on your computer.
If Wi-Fi works but printing still doesn't, treat that as a separate printer-installation problem. Check the selected printer, print queue, duplicate entries, and local network connection.
That approach keeps the fix simple and avoids changing settings that don't need to be changed.